From the genius of Pino Spagnolo and from the know-how of Puff Industries, a new electronic cigarette is born. Small, powerful and with italian design.
Two battery models available with Q mark, 1200 mAh and 2200 mAh with 510 thread and spring pin. Both of them with 32W maximum power and a constant voltage of 3,7V. Two cartomizers available, 1,8ml and 2,5ml capacity. Both provided with a 1.5 ohm resistance and snap ring to adjust the air flow, allowing both lung and cheek draws.
Among the available accessories are the spare OCC 1.0 ohm and 0.5 ohm resistances and a 510/EGO adapter, designed and produced for Avatar Q to allow use of any cartomizer with Ego thread. Avatar Q is provided with an innovative system of power adjustment which automatically sets the wattage according to the resistance mounted within the cartomizer (i.e. 1.5 ohm/9,126 W – 1.0 ohm/13,69 W – 0.5 ohm/27,38 W).
Q batteries are provided with a micro USB input port so they can be recharged with passthru function. They are also equipped with an effective visualization system of the charge status, indicated by two LEDs under the button (i.e. : both LEDs switched on during use=100%, one LED on=50%, both LEDs flashing =less than 30%).
Avatar Q is not a Vari volt and is not a Vari watt. It automatically adjusts the output power according to the impedance of the resistance mounted within the cartomizer.
To calculate the output power, the following formula is applied:
W (wattage)= V² (voltage x voltage)/ ohm (impedance)
Examples referred to the available resistances:
3,7 V x 3,7 V / 1.5 ohm = 9,126 W
3,7 V x 3,7 V / 1.0 ohm = 13,69 W
3,7 V x 3,7 V / 0.5 ohm = 27,38 W